HAXRO Juice Dispenser 3 x 18L
£406.80 Inc VAT £839.79
Home >
Machines > Frozen & Cold Drink Machines > Juice Dispensers >

HAXRO Juice Dispenser 3 x 18L

HAXRO

HAXRO Juice Dispenser 3 x 18L

SKU: HX8599

A stainless steel triple beverage dispenser with three transparent containers filled with red, yellow, and orange drinks, each dispensing into plastic cups with straws.
lose-up view of the drip trays and spouts of a stainless steel beverage dispenser, showing the metal grate design above white plastic drip trays.
Triple beverage dispenser set up outdoors at a market or fair, containing red, yellow, and orange drinks, with three filled plastic cups placed on the drip trays in front.
Close-up of a commercial juice dispenser lid with colorful fruit graphics including strawberries, oranges, and bananas.
Triple-tank commercial juice dispenser with labeled dimensions — 740mm height, 470mm depth, and 750mm width.
Close-up of two red switches on the side of a juice dispenser, labeled “MIXING” and “COOLING.”
A person is lifting or placing a clear plastic beverage container onto a metal dispenser base.
A close-up view of an empty commercial beverage dispenser with a transparent container and a white mixing paddle inside.
HAXRO Juice Dispenser 3 x 18L triple bowl cold drink dispenser with stainless steel base, clear tanks, and drip trays – ideal for serving chilled juice, iced tea, and cold beverages in cafés, restaurants, and catering events.
A stainless steel triple beverage dispenser with three transparent containers filled with red, yellow, and orange drinks, each dispensing into plastic cups with straws.
lose-up view of the drip trays and spouts of a stainless steel beverage dispenser, showing the metal grate design above white plastic drip trays.
Triple beverage dispenser set up outdoors at a market or fair, containing red, yellow, and orange drinks, with three filled plastic cups placed on the drip trays in front.
Close-up of a commercial juice dispenser lid with colorful fruit graphics including strawberries, oranges, and bananas.
Triple-tank commercial juice dispenser with labeled dimensions — 740mm height, 470mm depth, and 750mm width.
Close-up of two red switches on the side of a juice dispenser, labeled “MIXING” and “COOLING.”
A person is lifting or placing a clear plastic beverage container onto a metal dispenser base.
A close-up view of an empty commercial beverage dispenser with a transparent container and a white mixing paddle inside.
HAXRO Juice Dispenser 3 x 18L triple bowl cold drink dispenser with stainless steel base, clear tanks, and drip trays – ideal for serving chilled juice, iced tea, and cold beverages in cafés, restaurants, and catering events.
Description

HAXRO Juice Dispenser 3 x 18L

Serve more customers in less time with the HAXRO Juice Dispenser 3 x 18L, a high-capacity triple-tank cold drink machine designed for busy cafés, dessert shops, restaurants, and catering events.

With three 18-litre clear tanks (54L total), you can offer a variety of chilled drinks from juices and iced tea to smoothies and flavoured beverages all from one efficient unit. Each tank operates independently with its own cooling system and mixing paddle, ensuring consistent temperature and perfect drink texture across every serving.

Built with a durable stainless steel base, easy-pour taps, and removable drip trays, this dispenser delivers professional reliability and easy maintenance for high-volume service.

Specifications

Model HX8599
Capacity 3 × 18 L
Voltage 220 V–240 V / 50 Hz–60 Hz / 110 V–120 V
Power (Cold) 380 W
Power (Hot) 1620 W
Cold Temperature Range 7 – 12 °C
Hot Temperature Range 52 – 58 °C
Dimensions (mm) 750 × 470 × 740
Weight 40 kg


Installation

• Place the machine on a flat, stable surface away from direct sunlight.
• Ensure at least 15 cm of clearance around the unit for proper ventilation.
• Check that the power supply matches the machine’s rated voltage.
• Use a power cable with a cross-section of 1.5–2.25 mm².
• Connect the machine to a grounded socket with proper fusing.
• Slightly incline the front lower than the back to allow drainage through the hose.

Operating – For Cold Beverages

• Pour the beverage into the container without exceeding the maximum level.
• Do not fill liquids over 35°C to maintain cooling performance.
• Plug the machine into a grounded socket.
• Switch to “Cooling” mode and start the stirrer or dispenser.
• When cooled, gently press the spout lever to pour the drink.
• The compressor cycles automatically based on temperature.
• After a power interruption, wait 5 minutes before restarting.

Operating – For Hot Beverages

• Plug into a grounded socket.
• Switch to “Heating” mode and activate the stirrer.
• Fill with at least 6L of beverage to prevent dry heating.
• When heated, press the lever to dispense.
• The heater cycles automatically with temperature changes.
• Clean the containers daily to maintain hygiene.

Read more
Resources and Downloads
HX8599
HAXRO

HAXRO Juice Dispenser 3 x 18L

SKU: HX8599

£839.79
You save £432.99 ( 51% )
£406.80 Inc VAT ( £339.00 Ex VAT )
  • Low stock
Description

HAXRO Juice Dispenser 3 x 18L

Serve more customers in less time with the HAXRO Juice Dispenser 3 x 18L, a high-capacity triple-tank cold drink machine designed for busy cafés, dessert shops, restaurants, and catering events.

With three 18-litre clear tanks (54L total), you can offer a variety of chilled drinks from juices and iced tea to smoothies and flavoured beverages all from one efficient unit. Each tank operates independently with its own cooling system and mixing paddle, ensuring consistent temperature and perfect drink texture across every serving.

Built with a durable stainless steel base, easy-pour taps, and removable drip trays, this dispenser delivers professional reliability and easy maintenance for high-volume service.

Specifications

Model HX8599
Capacity 3 × 18 L
Voltage 220 V–240 V / 50 Hz–60 Hz / 110 V–120 V
Power (Cold) 380 W
Power (Hot) 1620 W
Cold Temperature Range 7 – 12 °C
Hot Temperature Range 52 – 58 °C
Dimensions (mm) 750 × 470 × 740
Weight 40 kg


Installation

• Place the machine on a flat, stable surface away from direct sunlight.
• Ensure at least 15 cm of clearance around the unit for proper ventilation.
• Check that the power supply matches the machine’s rated voltage.
• Use a power cable with a cross-section of 1.5–2.25 mm².
• Connect the machine to a grounded socket with proper fusing.
• Slightly incline the front lower than the back to allow drainage through the hose.

Operating – For Cold Beverages

• Pour the beverage into the container without exceeding the maximum level.
• Do not fill liquids over 35°C to maintain cooling performance.
• Plug the machine into a grounded socket.
• Switch to “Cooling” mode and start the stirrer or dispenser.
• When cooled, gently press the spout lever to pour the drink.
• The compressor cycles automatically based on temperature.
• After a power interruption, wait 5 minutes before restarting.

Operating – For Hot Beverages

• Plug into a grounded socket.
• Switch to “Heating” mode and activate the stirrer.
• Fill with at least 6L of beverage to prevent dry heating.
• When heated, press the lever to dispense.
• The heater cycles automatically with temperature changes.
• Clean the containers daily to maintain hygiene.

Read more
Resources and Downloads
HX8599

Related Products: Juice Dispensers